.avif)
[Silicone Doll Handling Guide] A Must-Read for Beginners! How to Properly Handle and Use Dolls to Extend Their Lifespan!
- 76SexDollShop
- Nov 28
- 6 min read
#SiliconeDollTutorial #DollBeginnerGuide #SiliconeDollHandlingTips #76DOLLSHOP #DollMaintenance #DollHandlingSkills #DollPosing #SiliconeDollUsageTutorial #DollCollection #AdultCollectionGuide
Foreword: Why should you be especially careful when handling silicone dolls?
Silicone dolls are quite expensive, ranging from tens of thousands to hundreds of thousands of dollars. Proper handling and transportation can significantly extend the lifespan of the doll and prevent irreversible damage (whether to your body or the doll's). This article, provided by the professional team at [76DOLLSHOP], offers a practical tutorial, guiding you step-by-step through the operational details.
The correct way to move silicone dolls
💡The correct way to hold and move silicone dolls｜Even beginners can easily master this!
You might think, "I have strong arms, I can just lift it up, right?" But moving a knee-high silicone doll (especially a heavy one) actually requires a lot of skill, otherwise not only will you strain your back, but the doll may also get injured!
Here's the recommended posture for handling the item 👇
🧸Step 1: Pass your arm under your armpit
Instead of just holding it randomly, you put your arm under the doll's armpit and hold it securely at the shoulder to prevent it from slipping.
🧸Step Two: Use your other hand to support your lower body
With your other hand, remember to support your upper thigh or under your buttocks . This will help maintain a more balanced center of gravity, making it easier and safer to lift.
🧸Remember: Don't use brute force!
Never move a doll by dragging its hands or feet with one hand , or support its entire weight with only your arm . Doing so can easily cause the skeleton to dislocate, the skin to tear, or even the doll to "burst on the ground".
🚨Handling Precautions Checklist:
✅ Pass your arms under your armpits and secure them at your shoulder position.
✅ Use your other hand to support the lower body's key points.
❌ Don't just hold hands or drag your feet while moving.
❌ Avoid swinging, tossing, or forcefully pulling to prevent damage to the skeletal structure.
✅ If you are unsure whether you have enough strength, it is recommended that two people carry it.
💡Easy trick to move a plush toy: Easily done with a tortoise car!
Moving silicone dolls doesn't actually require much effort. As long as you know the right method, you can save time, effort, and stay safe.
📦Recommended tool: Turtle Cart (Mobile Platform Vehicle)
✅Instructions:
Pick up the doll from the seat or bed with both hands.
Operating with one hand can easily lead to injury, and the doll is prone to accidental injury due to instability.
Gently place the doll on the tortoise car to fix it in a standing position .
If it wobbles around, it may fall to the ground because it is not properly secured.
Once you've confirmed the balance, you can easily push the tortoise car to move it.
When moving the toy, you should hold it in your hands along with the tortoise cart to prevent it from falling to the ground.
Whether you need to change the scene for photos, organize your belongings, or clean the space, the tortoise car is a super convenient helper!
🪑The correct technique for making a doll sit up | Avoiding injury, safe and effortless!
To make a silicone doll sit up, you don't need to pull or move it forcefully. As long as you master the correct angle and the way you apply force, you can easily do it and protect the doll's joints and appearance.
✅Operating steps:
Elbow in preparation for bending
First, bend the doll's elbows to an angle close to 90 degrees to simulate a natural sitting posture.
Adjusting the lower body
Gently press down on the doll's lower abdomen with one hand to stabilize its body, and with the other hand grasp one of its lower legs and pull it upwards to fold the leg into a sitting position. Repeat the same process for the other leg.
Complete sitting posture
After adjusting the legs, hold the calves and fold them down , so that the thighs and calves are at a natural bending angle in a sitting position, and the doll can sit stably.
Finally, install the head sculpt.
Once you've confirmed that your sitting posture is stable, you can attach the head sculpt to complete the overall pose.
🛏️ The correct technique for laying a doll flat: Protects joints and is easy to do!
To get a silicone doll to lie flat naturally, the key is to use the correct sequence and apply gentle pressure . Please be patient and careful during the process, ensuring the doll reaches the desired pose in a safe environment.
✅Operating steps:
First remove the head sculpture
To avoid injury or strain when adjusting your posture, please carefully remove the head sculpt first .
Adjusting the legs
Gently press down on the doll's lower abdomen with one hand to stabilize its body, and use the other hand to grasp one of its lower legs and pull it down flat . Then, in the same way, pull the other leg down flat as well.
Make minor adjustments as needed.
If the doll is still not fully lying flat, you can adjust the angle of its legs and waist as needed , making repeated fine adjustments until the doll lies flat naturally.
Basic rules for handling silicone dolls (move your feet but not your body/move your hands but not your body)
Correct method of joint manipulation
Operate only one joint at a time (e.g., only move the knee, without simultaneously pulling the thigh).
It is recommended to proceed step by step to ensure that each joint is in a natural and pressure-free position.
The joint has limited range of motion; please do not forcibly bend it.
First, confirm that the angle and direction are correct. Forcing the operation may damage the internal frame.
How to avoid operational errors
When moving your hands and feet, be sure to adjust slowly.
The bending angle is kept within the safe range of the doll's design to avoid deformation of the metal skeleton.
If you feel it's stuck, don't pull hard; try changing the angle.
Avoid bending it forcefully ; please adjust the direction slightly first, and never force it to bend.
No matter what pose you change to, you must remove the head sculpt first.
Avoid damaging the head sculpture or increasing the burden of moving it during posing.
🔧 Tutorial on positioning dolls in rear-entry positions (recommended to watch with video)
The rear-entry position is a common pose or practical position for many players, but because it involves the movement of multiple joints, it is recommended to watch a video to make the operation more intuitive and safer.
✅Operating steps:
First, bend your body at a 90-degree angle.
Position the doll's upper body and thighs at nearly a 90-degree angle to facilitate turning it over and fixing its posture.
Roll over onto your back
Carefully turn the doll over so that its back is facing up, and its legs are naturally standing on the bed or table , so that the center of gravity is evenly distributed.
Place both hands for support
Place the doll's elbows on the bed or table to simulate a natural supporting action, and make slight adjustments to stabilize the posture.
Finally, install the head sculpt.
After the posture is stable, the head sculpt is then installed to avoid neck strain or tilting due to increased weight when turning over.
💡 This pose is more advanced. It is strongly recommended to practice with the instructional video to make it easier to master the changes in center of gravity and angle, ensuring safety and aesthetics.
Frequently Asked Questions (FAQ) for Beginners
Q1: What should I do if I accidentally let the doll's finger bone protrude?
We sell repair fluid; please consult customer service before purchasing.
Q2: Can the doll stand for a long time?
If standing pins are installed, the product can be displayed for a short time, but it is still recommended to avoid standing for long periods of time to prevent foot abrasions.
Q3: Do I need to change my pose every day?
It depends on your posture, but you should adjust it at least every 3-5 days to avoid localized pressure damage and joint fatigue.
Conclusion: Use it correctly to keep your doll with you longer.
Silicone dolls are like exquisite items; they require careful handling. By familiarizing yourself with the correct operating and handling methods, you can extend the lifespan of the dolls and preserve their original beauty and texture.
Thank you for reading and following!
If you have any questions about silicone dolls, or would like to learn more about brands, functions, and purchasing advice, please feel free to contact us through the following methods👇
📌Contact our professional customer service immediately:
🔹 LINE Official Customer Service: Click to Join
🔹 WhatsApp Personal Consultation: Click to Contact
🛒View our complete product information and in-stock list:
💬Join our doll enthusiast community to exchange experiences:
🎯 Discord Doll Community Chat Room: Click to Join
Thank you again for reading. If you enjoyed this article, please feel free to leave a comment, share, or save it. See you next time!
——76DollShop Team
Comments