.avif)
[Real-world unboxing and testing] How soft is the 76 Butt King series? Liquid TPE 10KG vs 5.5KG Butt Molding Full Unboxing | Complete Review of Dual-channel Pinkish Details
- 76小編-Annie
- Dec 4
- 7 min read
In the dazzling array of products on the market, finding one that is "truly soft, substantial, and factory-tested" is not easy. This time, we're showcasing two of the most anticipated liquid TPE moldings from the 76 Buttocks King series: a 10KG large size and a 5.5KG lightweight size. Not only are weight measurements and real-life photos demonstrating its softness revealed, but even the texture and channel structure are fully presented, making it one of the most realistic and transparent buttock molding unboxing videos on the market . Below, we'll take you through a deep dive into "just how soft is it?", covering materials, softness, internal structure, weight differences, and purchasing considerations.
#76DollShop #KingofButtsSeries #The softest on the entire internet #Money Back Guarantee if Not Soft #SiliconeDoll #TPE Unboxing #Realistic Molding #Extremely Soft #UltimateExperience #SmallClassUnboxing #Liquid TPE
The 76 Buttock King series buttock mold 's technical positioning: Liquid TPE × Realistic weight × Exquisite appearance
This time, we directly showcased two buttock molds from the 76 Buttock King series, both made with advanced liquid TPE . This material surpasses regular TPE in formulation and molecular density, offering higher extensibility, finer elastic curves, and a more viscous, elastic feel that closely resembles human fat. Liquid TPE exhibits more natural dynamic behavior under pressure, rebound, and shaking, making it a commonly used core material in mid-to-high-end buttock molds. The key technological highlights of the 76 Buttock King series include:
Liquid TPE material
Extremely soft, extremely elastic, and with a more natural dynamic feedback molecular structure, it has a denser texture. When pressed, it has a deep, sinking feel, and when released, it has a smooth, bouncy rebound. It does not produce the dead corners or stiff spots commonly found in hard material products. The overall softness is close to the feel of a mixture of fat and muscle in a real person's buttocks.
The actual weights of 10KG and 5.5KG have been verified by actual weighing. By increasing the density of the material and the thickness of the flesh, the proportion of the buttocks mold is closer to that of a real person in terms of volume and weight, and the deformation when shaking, pressing down and placing on the side is more natural; the 10KG version is especially immersive in terms of weight and realism.
The dual-channel, pinkish structure features multi-layered textures, softened materials, and segmented stimulation. The internal channels utilize differentiated textures, adjusted pleat density, and softening technology to enhance firmness, coverage, and absorption. The dual-channel design also provides a more layered user experience, significantly different from typical single-groove TPE channels.
The appearance is exquisite. The skin texture, navel, and line proportions are all three-dimensional. As can be seen from the factory's actual photos, the surface skin texture is fine and the unevenness is natural. The pelvic lines, waist and abdomen undulations, and buttock thickness all present a high degree of simulation. Visually, it is closer to the texture of real skin than ordinary buttock molds.
Weight difference test: The user experience of 10KG and 5.5KG is completely different.
10KG: Close to real body weight, with the most noticeable sway.
When placed on a table, it produces a large and delayed shaking amplitude when hit by external force, showing that its material density and soft tissue performance are close to the dynamic response of real human fat. When the pressure test is carried out, a deep sinking sensation can be clearly felt. After the pressure is dispersed, the material can return to its original shape with a natural and continuous rebound curve , without the collapse or stiffness commonly seen in hard material products.
The overall appearance is presented with a full and thick buttock proportion , with enough flesh to support the buttocks, pelvis and side curves, making the visual and tactile feel closer to the real person.
In terms of overall dynamic performance, this model has an extremely high balance between softness, swaying amplitude and pressure feedback, and can be regarded as one of the models on the market that is closest to the movement characteristics of real soft tissue in TPE buttock molds.
5.5KG: Medium weight, making operation easier.
With its mid-weight design, this liquid TPE maintains its softness and natural resilience while offering a more user-friendly overall weight. In terms of handling, whether picking it up, moving it, posing for photos, or using it for extended periods, its lightness is noticeable and won't create any extra burden. This model is especially suitable for users who want both a realistic feel and ease of use , achieving a good balance between user experience and weight control, making it a mid-size option that meets a wide range of needs.
Low-quality comparison: 1.5KG Small Butt Molding and Butt Queen Series
Low-quality molds commonly found on the market are mostly lightweight products, typically weighing only about 1.5KG , far below the material density and volume that a standard mold should have. Because these products use lower-cost TPE blends, they are harder, lack elasticity, and have extremely weak shaking response , failing to replicate the dynamic performance of real human soft tissue.
Furthermore, these products are generally smaller in size, with noticeably insufficient proportions in the hips, waist, and thighs. They appear thin and lack volume, and details tend to show simplified textures and a flimsy surface , making it difficult to provide realism or three-dimensionality. Although these products are often packaged as "moldings," most fail to meet the standard requirements for buttock moldings in terms of key indicators such as weight, size, material, and dynamic feedback .
Dual-channel pink design: The internal multi-layer structure and soft material are fully presented.
Adopting a dual-channel design
The inner wall has a multi-layered three-dimensional texture.
Use special softening material to improve firmness.
The depth, texture, and stimulating sensation are all superior to those of ordinary TPE molding.
The addition of pastel colors and natural openings makes the overall visual appearance closer to the real structure.
Appearance details: the skin texture, navel, and frontal curves are all highly refined.
The surface has a fine and layered texture with uniform density, and when touched, it has a microscopic texture similar to genuine leather. Anatomical details such as the navel, pelvic lines and local undulations are also fully preserved, and the outline is natural and not abrupt.
Whether in 10KG or 5.5KG size, the natural and continuous curves extending from the waist to the hips are visible, with a thick and even distribution of flesh. Viewed from multiple angles—back, front, and side—the buttock mold exhibits excellent three-dimensionality and light and shadow variations, making its appearance more closely resemble the shape and structure of a real human body. Such a high degree of detail in TPE material is rare, and the overall finish approaches the visual and tactile standards of mid-to-high-end buttock molds.
A complete comparison table of two buttock molds (weight × material × ease of use)
Project | 10KG version | 5.5KG version |
weight | Real-life | medium |
Material | Liquid TPE | Liquid TPE |
softness | ★★★★★ | ★★★★☆ |
Swing amplitude | Largest, with a strong jelly-like texture | Obvious but smaller |
External dimensions | Large, full, and thick | Medium-strength, easy to handle |
Channel stimulation | Multi-layered and complete, with deeper coverage | Multi-layered stimulation, solid foundation |
Ease of use | Slightly heavy, requires desktop support | Lighter and easier to use |
Price | USD $130 | USD $80 |
Choose the most suitable feel based on your needs: 10KG and 5.5KG usage positioning.
Considering the overall material performance, weight, feel, and ease of use, both buttock molds possess the high softness, natural elasticity, and exquisite appearance details brought by liquid TPE, making them a highly complete choice among products in the same price range. The 10KG version, due to its weight and size being closer to that of a real person, has a more prominent range of motion and a heavier feel, making it suitable for users who pursue a strong sense of realism and high degree of realism.
The 5.5KG version balances softness and ease of use, is lightweight and easy to store, and also provides good channel stimulation, making it more suitable for users who prefer flexibility and ease of use. The two versions are positioned differently; the key is to choose the one that best suits your needs and preferences.
Purchase link >> https://shopee.tw/76dollshop
Q1: Are the 10KG and 5.5KG versions made of the same material? Is there a big difference in softness?
Both use the same grade of liquid TPE material, so they are consistent in terms of touch, elasticity, and rebound characteristics. The main difference lies in weight and volume. The 10KG version has thicker flesh and higher quality, so the shaking amplitude and downward pressure feel when patting are closer to that of a real person. The 5.5KG version, while retaining softness, is more maneuverable and has a more user-friendly weight.
Q2: How do I judge the quality of a buttock mold by its weight? Is heavier always better?
Weight is an important indicator of whether a mold is made of "realistic materials". Molds that are too light (e.g., 1.5KG to 3KG) usually indicate insufficient volume or the use of inferior materials, which can easily result in a flimsy appearance, insufficient bouncyness, and a hard feel. Heavier is not necessarily better; the appropriate weight should be chosen based on usage needs. 10KG provides the most realistic feel, while 5.5KG is suitable for users who want a balance between realism and ease of use.
Q3: Will the dual-channel and multi-layered internal structure of the buttock mold affect its durability? Does it require special maintenance?
The dual-channel and multi-layered irritation structure itself does not reduce durability. Liquid TPE has good elasticity and extensibility, and is not easily broken under normal use. Maintenance mainly focuses on cleaning and drying: after use, rinse with warm water and neutral detergent, and avoid direct sunlight and high temperature environments.
Thank you for reading and following!
If you have any questions about silicone dolls, or would like to learn more about brands, functions, and purchasing advice, please feel free to contact us through the following methods👇
📌 Contact our professional customer service immediately:
🔹 LINE Official Customer Service: Click to join
🔹 WhatsApp Personal Consultation: Click here to contact
🛒 View our complete product information and in-stock list:
💬 Join the doll enthusiast community and exchange experiences:
🎯 Discord Doll Community Chat Room: Click to join
Thank you again for reading. If you enjoyed this article, please feel free to leave a comment, share, or save it. See you next time!
——76DollShop Team
Comments